The
American Eagle has a five position adjustable blade angle with up to 26 1/2
degrees of angle. There are also adjustable blade pitch stops for maximum
blade adjustment. It also features a solid 5/8" diameter blade positioning
pin (largest in the industry). It comes standard with hardened 3/4" thick
Ductile steel square steel tubing and has a 1/4" steel construction at all
critical mounting points.
Quick Mount System: (Patent Pending)
To
mount the plow you simply roll the ATV into the raised plow frame, and
secure it with the Quick Latch. The Quick Latch bracket system features
spring loaded swing latches which allows the operator to quickly attach the
plow frame to the ATV mount without tools or having to line up the mounting
holes.
American Manufacturing's ATV Plow Attaching System is the first and only
ATV plow that uses a Patent Pending two part mount. This two part system
consists of a Mounting Plate and the Universal Tube Frame Mount. Once the
Mounting Plate is attached to the ATV you can simply slide on the Universal
Tube Frame Mount and tighten four bolts. Before trail riding you simply
loosen the same four bolts and slide the Universal Tube Frame Mount off.
This system has the benefit of no loss of ground clearance, or any hanging
parts to catch or bend. As an added bonus the Mounting Plate also doubles
as a heavy-duty skid plate.
- Mounting Plates and Quick Mount do not use U-bolts
- No loss of ground clearance from protruding bolts when plow is removed
- Quick Mount - No pins to lose or holes to line up
Plow Blade Construction
- 12 gauge high alloy steel blend is 40% stronger by weight than other
blades.
- Available in 50", 60" and 72" Standard Blades, and 50" and 60" Country
Plows (rubber flap is included on Country Plows only)
- Available in Black and Yellow
- 3"-wide, 1/4" thick, double-sided wear bar
- 26 1/2 degree plow angle
- 3/4"-thick Blade Skids - thickest in the industry
Swivel Construction
-
5/8"
Blade Swivel Pivot Mount
- 1/2" Blade Mounting Pivots
- Swivel is constructed of 3/8" thick material and 1 3/4" angle iron for
strength and wear
- Swivel attaches to blade 20" apart for the strongest blade mounting
system
- Built-in blade stops to prevent dented blades
- 5 pivot positions provide up to 26 1/2 degrees of angle
- 5/8" blade position pin
- 8"-wide for better stability
- 4-position, 3/8"-thick blade pitch stop
Blade Skids
-
1/4"-thick
Skid Mounting Bracket is the widest around for added strength
- Height is fully adjustable
- Made from Ductile Steel - The hotter it gets, the stronger it gets
- Ten times more wear - On dry pavement our standard skid lasts 29 miles
versus the 2.9 miles of other plow manufacturers standard skid
- 3/4"-thick standard, thickest in the industry
- Widest skid mount available, stronger than anything else out there
The Winch Mounting Kit
- Easily attaches to your ATV. Custom fitted for each make/model.
The Mile Marker
Electric Winch - (Model PE2500)
2500
lbs. single line rated line pull
3/16"x50'
galvanized aircraft cable with replaceable hook supplied (min. break force 4200
lbs.)
.9
hp (.7kw) heavy duty electric permanent magnetic motor
Accepts
Cycle Country or Warn mounts
Planetary
gear system for fast line speed
Includes
8'handheld remote
Free
spooling
Power
In and Power Out
Low
electric current
